• Jun 16, 2021

Neodymium pot magnets - PULL FORCE TABLE

  1. Home
  2. Blog
  3. Neodymium pot magnets - PULL FORCE TABLE

PULL FORCE TABLE

Neodymium pot magnets

Please note that the approximate pull force info listed is for reference only.  These values have been calculated with the assumption that the magnet will be attached to a flat 1/4'' thick steel plate.  Please be sure to test the actual pull in your actual application.

Counterbored neodymium pot magnets

Diameter
Diameter
 Model Unit weight
 Pull force
0.63'' 16mm A16 7 gr 11 lb
0.79'' 20mm A20 14 gr 14 lb
0.98'' 25mm A25 22 gr 31 lb
1.25'' 32mm A32 40 gr 55 lb
1.65'' 42mm A42 78 gr 82 lb
2'' 48mm A48 117 gr 150 lb
2.36'' 60mm A60 252 gr 245 lb
3'' 75mm A75 493 gr 357 lb

 

 

Click here to purchase your counterbored pot magnets

 

Countersunk neodymium pot magnets

Diameter
Diameter
 Model Unit weight
 Pull force
0.63'' 16mm B16 7 gr 11 lb
0.79'' 20mm B20 14 gr 14 lb
0.98'' 25mm B25 22 gr 31 lb
1.25'' 32mm B32 40 gr 55 lb
1.65'' 42mm B42 78 gr 82 lb
2'' 48mm B48 117 gr 150 lb
2.36'' 60mm B60 252 gr 245 lb
3'' 75mm B75 493 gr 357 lb

 

Click here to purchase your countersunkpot magnets

 

If you have difficulties to find the mechanical plan or drawing please contact us and we will send you additional informations. 

For more informations about other neodymium pot magnets with tapped hole or with threaded stud or collar please contact us with dimensions and quantities and we will quote accordingly. 

Can also be supplied with hooks and eyebolt or rubber coated.

 

←  Back to Blog

Leave a comment

Please note, comments must be approved before they are published